Wednesday, 16 July 2014

Brake Cooling

All the talk in the championship recently is about brake cooling. 

With our next round being at Rockingham (which is a big test for brakes)  and the English summer set to be a hot one, we've fitted the optional GT3 brake cooling ducts.  These are larger and sit lower under the car to direct more air onto the front brakes.  

We still expect I have to manage brakes during the races. Stopping from 125mph+ down to 45mph puts a strain on the brakes.   If the ABS is used to much it quickly overheats the brakes and you have to brake earlier and more gently into corners. 

I expect we will also put direct ducting from the front bumper into the brake discs or open up the inner wheel arch liners to allow even more cooling, and this allow us to brake more aggressively and for longer in races with less fade. 

Wednesday, 25 June 2014

Rolling Road Session

To date we've had no idea how much power our engine is outputting.  Interested to know how well it performs and if we are on a par with other cars in the championship we booked a session on a local rolling road.  Snetterton Speed Shop; based at the Snetterton Circuit, is a small unit who specialise in Mini race preparation, running several cars in the BRSCC Mighty Mini championship. Owner Jonathan Lewis won the championship recently so they clearly know what they are doing!
In the best case our engine would be producing over 250bhp. On the other hand if power was much lower this would indicate the need for a rebuild sooner rather than later.  


As the car was setup on the rolling road it became apparent there was an issue with ride height.  Although the Porsche Boxster isn't that low at 100mm, the chassis support arms underneath the engine hang lower and were scraping the rollers. 

The guys quickly removed the wheels and adjusted the Gaz shocks to raise the height by 10mm each side, carefully marking the original position so we could put it back easily afterwards. 
Once that was sorted the rolling road was fired up and they put the car through three separate power runs. Each time getting the car into 4th gear and then taking the revs up to the 7,000 rpm limit.
The output showed our engine producing around the factory spec 250bhp.  Although a little less that a perfect newly rebuilt engine, this is perfectly respectable for 13 years old and 80,000+ miles old. 

Wednesday, 14 May 2014

Croft Race Event

We traveled north; a 300 mile trip for me, to Darlington on the Friday morning.   The Croft circuit is pretty basic in terms of facilities. Portaloos, a stand-pipe and burger van.  What more could you need?  
 
Arriving at lunchtime we grabbed a section of tarmac as our base, next to the TF Motorsport truck, who'd transported the car ahead for us.  Not having an awning meant we'd work out of the boot of the Freelander and expect to get wet over the weekend.
 


We had to get a new left front tyre fitted in anticipation of wet weather, the others are half worn (3.5mm tread) and will do for a while yet.  Heading out for the first of two 30min practice sessions, the track is flat and fast with some 4th gear 100mph corners.  I managed several 5 lap stints, reducing tyre pressures as the temperatures increased.  I finished the day setting times a couple of seconds down on the front runners and pretty happy with how I ran given the limited time to learn the track and make setup changes to suit conditions.

A bonus in the evening was a Mexican food and drink night put on by some of the driver's families which went down really well with everyone.

Saturday Qualifying: 

We awoke to torrential race on Saturday morning, so arriving at the circuit we hastily changed the roll-bar and damper settings back for wet conditions.  Qualifying was very difficult with standing water in many corners and all the way down the start finish straight.  I qualified 13th as the slowest Boxster, 2 seconds off the next best.

Afterwards we found that in my haste I'd set the dampers wrong and the settings were all over the place. This married with the fact almost everyone else has a spare set of wheels with new tyres gave me some solace.


Race 1
The first race is before lunch. We guessed the track would be partially dry, but on the green flag lap it's fully dry.  On the grid I somehow missed the lights and got passed by all 3 production spec Boxsters down to turn 1.
I'm thinking I'll pick them off one by one, but coming into the last section of the lap mud got sprayed up across my windscreen.  In my efforts to get the wipers to clear it I managed over rev out of the hairpin, put two wheels on the wet grass and a 180 spin was inevitable.  Luckily following cars avoided me and and I got the car onto the grass out of thier way.
On rejoining I was dead last so spent the race picking off the slower Porsche 924's.
 

Race #1 Spin - https://www.youtube.com/watch?feature=player_detailpage&v=HaxuQ0A9I8U#t=180
 

Race 2
The weather was again changeable, but I went with a full dry setup, determined to make the best of it.
 

I got a much better start gaining a position and keeping up with the battle for 7th place ahead and making it a four way fight down to 10th.  With stiffer suspension settings I found I could push harder through the faster corners to keep up and trail-brake into the slower ones to gain on the cars in front.  I felt confident of attacking for position towards the end of the race.

 


Unfortunately a car went off into the barriers and the safety car was inadvertently put out onto track and we all followed it round for the last 5 laps.  I finished 9th, much happier that I could run with the mid pack of cars.  

Wednesday, 9 April 2014

Silverstone Race Event

The first event of 2014 was at Silverstone using the International circuit layout and "The Wing" Grand Prix pits and garages.
Friday testing was initially a shakedown test for the work we had done over the winter.  In the second session the headlight unexpectedly flew off, bouncing off the top of the car and up into the sky as we braked into the first corner.  Lucky no major damage done. 

I got faster in the afternoon and tweaked the car setup for dryer and faster conditions ending the day pretty happy. 

Qualifying - Saturday AM  
I got an early banker lap in but after finding space on track oil went down at the first corner and nobody could set faster times. I qualified 8th a little disappointed especially since most people went faster than Friday. 

Race 1 - Saturday PM
I got a reasonable start but being on the outside got pushed wide and lost momentum leading up to and onto the long hanger straight.  

My manic first lap continued as I had to fend off a strong challenge from the leading Class-B boxster before going three abreast around the final turn.   It took a couple of laps to get back past, but by then a big gap had opened in front.  I was lapping very consistently for a 7th place finish. 
Photo AJB Photographic http://www.ajbphotographic.co.uk/
Race  2 - Sunday PM
Wet conditions made it a tricky last minute call on rollbar and damper settings.  It had stopped raining - the track was wet in places - but would it dry out?  

I got a flying start as others bogged down with wheelspin moving into 4th at the first turn.  The front runners were pulling away on the straights but I managed peg them back in the corners and under braking. The back section of the track was very slippy.  I got very sideways in the first two laps being to eager with my right foot. 

I got passed for 6th place but managed to keep pace and put the driver under a lot of pressure mid race.  We reeled in the battle for 4th & 5th but the car in front spun at the final hairpin. I had to take to the grass to get by and so settled for 6th. Very happy with an equal best ever finish. 

Only a short break 5 weeks until the next round at Croft which is also a new circuit for me. 

Monday, 31 March 2014

Race Ready for 2014

With our first race of 2014 less than than a week away the car needed some final checks, a good clean and the championship decals to be fitted.

The final setup included setting and checking the ride height using the adjustable spring perches on the GAZ Gold dampers and choosing our initial damper and roll-bar settings for the Silverstone International circuit.  Half a tank of fuel was also added so we can go straight out on track during testing.


We encountered a slight hitch initially when the car wouldn't start - despite a fully charged battery.  We traced this to a poor earth connection from the battery to the car chassis, and after cleaning the connection everything worked perfectly.

The mandatory in-car camera was checked.  We are using a BlackVue 12vpowered model which records constantly whilst the ignition is on.  Our LUKE safety harnesses were adjusted, before the car was given a thorough clean inside and out.  The amount of dirt and dust which accumulates inside is amazing.

The BRSCC Porsche Championship which we run in has a number of sponsors for 2014 (Toyo Tires / Jasmine PorschaLink / Fuchs Titan Race Fluids), whose logos must be displayed in the correct places.  In addition we need the race numbers on each door, windscreen and dashboard, plus the safety stickers for the towing loops, electrical cut-off and fire extinguisher.









Monday, 24 March 2014

Final Preparations for 2014

Finishing the Winter overhaul took a bit longer than planned.  

On replacing the leaking coolant hose, we found another leak, this time in a different hose. After this was replaced we were still dripping coolant, and this time we traced it to the water pump.

This is a time consuming job, since the front seat has to come out to get access through to the engine compartment.  The pump was replaced with an uprated OEM part as well as the thermostat (which you have to remove to get access) and new gaskets.  The thermostat is a low temperature version which is one way of limiting bore scoring in these Porsche engines.


In all we have refilled the coolant 3 times now - and hopefully that is the last time for a while.  We are far too familiar with the process of bleeding the system, which takes around 45mins each time!
Our front brakes were worn down to 2-3mm, so these have been changed along with new brake discs.  The pads are Mintex race pads, but the discs are OEM standard fit drilled and vented ones for a 3.2S Boxster.
  

A new sports exhaust has also been purchased and fitted, saving around 10KG's of weight.  This is significant, given the minimum weight limit is reduced this year by 20KG's.

The final servicing work was to replace the engine oil and filter.  We have used the last of our Mobil 1 15-50 Motorsport oil. This oil is no longer being produced so an alternative is needed for next time.  Whilst the oil was out we also changed a leaking seal on one of the camshaft chain tensioners.



The replacement front bumper has been resprayed and fitted, giving the front end of the car a nice shiny look, ready for the updated 2014 championship decals to be fitted.