Saturday, 18 May 2013

A Wet Race at Silverstone

Going to Silverstone was always a bit of a gamble. With no time to test, and having never even visited the place, let alone done any laps I would have to learn the track during qualifying.

We arrived early Saturday morning, taking up residence in the large Garage.  We took advice from South Shore Tyres to stick with our 3/4 worn Toyo 888's despite the threat of rain.  Qualifying was dry and I had clear track to start, however lacked confidence (which comes from track time) to push harder through the fast corners.   

Unfortunately I then picked up damage to the side of the car passing a 924 and was later accidentally bumped from behind by a faster Boxster.  I qualified 12th - disappointed not to be faster (2 seconds off my target time) and about the damage we had sustained, albeit cosmetic.  On checking the car after Qualifying we found one of the front brake pads we in back-to-front e.g. metal backing plate on the brake disk, which obviously did not help, but was easy to fix.
 
Race 1
By mid afternoon it was raining heavily and despite interludes the track was very wet. We softened the dampers a few clicks all round and added a couple of psi to the tyre pressures for our race at the end of the day.

I found grip from the tyres was good....in a straight line and got a really great start, passing three cars by the first corner.  Three more cars spun in front during the first 2 laps and I was able to keep pace with the battle ahead. I overtook once and got alongside a couple of times but could not hold the place.

Car control in the corners was difficult with too high entry speeds washing you wide and anything other than a delicate right foot kicking the back of the car out. I finished a very competitive 8th - A great result.


Race 2
On Sunday afternoon rain was forecast and visibly getting closer, but we stuck with stiffening our suspension from qualifying to reduce over-steer tendency.  

It started to rain as we took to the grid.  My start was good but after a couple of laps I couldn't keep pace with the mid pack of Boxsters and lapped incident free, mostly on my own to the chequered flag.
Chasing the pack (Photo by Dennis Goodwin)
The car felt better and looking at my speed at reference points on track combined with my lap timer I was able to increase performance through Copse corner particularly. I beat my dry qualifying lap time by 0.6 seconds despite the light rain conditions. An improvement of 1.5 seconds in real terms.

Monday, 15 April 2013

Rockingham Race 3 On-board Video

My on-board video from Race 3 at Rockingham has been downloaded.

Note: Ignore the date-stamp as this resets when the camera battery runs out each time.

This is my view from the start.  Some cars come underneath me on the inside of the banked turn, and I take the longer/faster outside route around the first hairpin.


Mid way through the race car #69 comes alongside me into the braking area for the hairpin.  We travel round the next two corners side-by-side allowing each other room before I have to give up the place.   I was very close to getting the place back, but ran out of laps.

Wednesday, 10 April 2013

Rockingham Race Event

We arrived at Rockingham near Corby an hour before scrutineering on Saturday am. The paddock was full with many cars having tested on Friday and we grabbed the last garage space.

Heading out for qualifying, I had knocking noises coming from underneath the car, so  stopped at the end of the pit lane. After a minute thinking what to do, I decided it had to be stones hitting the underside of the car, which is amplified without sound deadening and so went out onto the track.

Handily, this delay gave me clear track to bed in my new brakes and set about increasing my speed lap by lap. My free lap timer (RaceChrono for Android) showed I was flying;  4+ secs up on last year, and getting faster each sector.  I qualified an impressive 7th (1m42s.)


On the cool down lap however, the noises were back and in the garage we found the handbrake mechanism had failed inside the hub. An easy fix with new springs from Jasmine-Porschalink (A new series sponsor who are providing a parts van at each event).

Race 1

I got a good start and picked up places round outside of the first hairpin. The car felt good and I was looking for an opportunity on the car in front (5th place). That changed dramatically as a small mistake turning in too late let two cars through and then an over zealous right foot had me fighting over-steer and a tank-slapper on the exit to the main straight.  Whilst I avoided hitting the wall, I lost momentum and was now well down the field.  I got one place back a few laps later, but a trip over the grass under pressure gave that place and another away. I finished a little disappointed in 9th.

Race 2

I started 9th, but found my confidence had disappeared following the events of race 1.  I felt the car had no grip, my times were well down and I was struggling to stay ahead of the Class-B Boxster's.  In hindsight my tyres pressures could have been too low or I hadn't got them up to temp on the warm-up lap. I finally got my act together increasing speed and confidence and with the help of a brief safety car lap joined the battle for 7th-10th places pushing them hard on the final couple of laps.  On the last lap however, the gear lever mechanism failed as I braked from 125mph into the first hairpin, leaving me stuck in 4th. Not knowing what had happened, I took the safe option of the exit road and was towed back for my first ever DNF.

Another trip to the Jasmine-Porschalink parts van to replace the plastic gear lever linkage which had worn out and we were quickly ready for the final race. I put tyre pressures up in an effort to abbate the drop in ambient temperature (evening was approaching) and also to make sure I had good grip immediately.  I worked really hard on the green flag lap to get temperature into the tyres.




Race 3
I started 6th on the grid based on my 2nd fastest qualify time. Whilst I lost out a couple of places initially I was lapping in 1m43s immediately, keeping up with the cars in front despite increasing pressure from another car behind.  I eventually had to yield 9th place after some very close but also very fair racing.  I returned that pressure in the last two laps, but ran out of time, coming home 1/2 a sec behind in 10th.


A great start to the season! We have definitely made a significant leap forwards, matching professionally prepared cars and more experienced drivers over one lap. I need more experience to become more consistent in the race and to not make mistakes under pressure from drivers behind.  We also proved we can diagnose and successfully repair problems on the car ourselves.   Full timing and results at TSL-Timing.com

Tuesday, 2 April 2013

A new look for the 2013 Season

The car returned from the paint shop with the damaged panels repaired and resprayed.  We also opted to paint the bonnet, roof and boot white.  Inverse blue stripes were added too, giving the car a overall more professional look for this year.  
 
 The final pre-race checks have been done, refitting the fire extinguisher, checking the operation of cut-of switches, lights and adjusting safety belts.

The ride height was re-checked and adjusted (using the adjustable spring perches on the dampers) giving us a couple of mm over the regulation minimum at the front, with around 10mm higher at the rear.  Some height had been lost due to wear on the tyres and one spring perch coming loose and dropping slightly.  We also rechecked the wheel alignment and are going stick with dead straight at the rear and 1mm of tow-out at the front.

Finally some of the mandatory championship decals have been fitted and the car given a good clean and polish


The 2013 BRSCC Porsche Championship starts at Rockingham near Corby in the midlands.

Tuesday, 5 March 2013

More Winter Work

Brake Service
After the last track day, we noticed the front brake discs starting to develop tiny cracks between the drilled holes.  This is a common occurrence when the standard discs are put under the extreme heat generated by the race brake pads under race conditions. 

If we don't change the discs there is a chance they could disintegrate on hard braking.  OEM discs only cost £50 each so it is better to be safe and change them frequently along with the brake pads and a change of Castrol SRF brake fluid. 



Drop Links
The uprated anti-roll bars will cause extra stress on the standard drop links.  As our suspension is considerably lowered these are also really too short now.

We have decided to replace them with uprated and adjustable drop-links which RND Motorsport have developed for us.  

The adjustment will allow the weight distribution to be evenly set ensuring a better handling car. 






Light Weight Heater

Since we use the car for both racing and track days during the winter months we wanted to keep some decent heating.  There is nothing worse than a steamed up windscreen or a freezing cold car.  
We have fitted a mini water based heater from T7 Design which connects to the original water pipes via an electronic valve to control the production of heat.

The result is a fan not far short of the original power and the ability to control hot or cold air to both the windscreen and the centre dashboard vents.  The heater and pipework weighs less than 1.5KG vs the 7KG's plus of the old unit.

.

Paint Shop
With the dashboard refitted, minus the lower console and a lot of eexcess wiring which we didn't remove last time; the car will be off to the paint shop for the danaged panels to be resprayed  and a slight twist on our color scheme!

Monday, 4 February 2013

Winter Work Progress

Progress has been a little slow with the bad weather recently, but with the 2013 season looming  fast the main service work has been completed.

The coil packs were removed and replaced along with new spark plug tubes, spark plugs and o-rings. The old coil packs were very badly cracked and corroded with bits of their casings missing and oil was leaking from the o-ring seals around the plastic tubes.  


Next the oil was drained and a new genuine filter fitted.  Finally a the engine was given a good clean around the valve covers and the underside of the engine, where oil is weeping (not dripping yet!) from the rear main seal area.

The engine runs noticeably smoother now.  




In the mean time our H&R anti-roll bars arrived. 

Whilst these are heavier than the originals (being solid rather than hollow) they will reduce the amount of body roll when cornering.



These were fitted with new rubber bushes and stainless bolts.  Adjustable drop-links are being made up for us and these will enable the car to be correctly corner weighted.
The next piece of work was to remove the seats and dashboard (again!) in order to pull out the main air-con and heater matrix unit.  

This is the work we should have done the first time around when getting the roll-cage installed having now realised we still need to reduce the weight of the car by around 20kg's. 

A basic lightweight heater will be installed to ensure we can still clear the windscreen in the rain and have some cool air flow in the hot summer.

A significant amount of wiring can also be removed which fed the roof mechanism, interior lighting, heater control, air-bag control and PCM sat-nav units. Every little helps.