Friday, 8 June 2012
Snetterton Races on YouTube
Coverage of the two Sundy races from the Snetterton round we took part in are now available on YouTube.
Sunday, 20 May 2012
Performance Exhaust
In preparation for our next race event at Brands Hatch we finally got around to replacing the standard exhaust back-box with a Cargraphic sports exhaust (ebay bargain). Most of the bolts on the original exhaust were rusted so it took several hours to remove.
Th new exhaust was fitted with new clamps and stainless bolts all round and allows the engine to rev more freely. It is definately much louder and will provide a useful BHP & Torque increase.
We also replaced
and re-wired the electrical cut-off pull switch. The pull handle was a
poor qualifty one and cutting the fuel-pump allowed the engine to run-on
for a few seconds. It is now wired into the DME fuse (C1) and kills the engine instantly.
Labels:
exhaust,
modifications
Thursday, 17 May 2012
Snetterton Race on Motors TV
The Snetterton race event was filmed and is being shown free-to-air on Friday 18th May @ 5:50pm on Motors TV UK (Sky Ch 413).
All of the cars have bright green Logson Group windscreen banners which advertise the title sponsor of the series. This sponsorship helps pay for the filming, production and TV air-time.
A full TV schedule for the season is here. The race coverage is also put on the GoRacingTV youtube channel a few weeks after being shown on Motors TV.
Monday, 30 April 2012
First Race Weekend (Snetterton)
Our first race weekend was at the very wet Snetterton circuit in East Anglia on 28th & 29th April 2012.
We arrived at 8am and had a pit garage to unload our kit into.
We arrived at 8am and had a pit garage to unload our kit into.
After signing on at race control, adding the mandatory series decals, the car was safety scrutinised before we headed into the assembly area for qualifying. Our standard exhaust didn't trouble the noise tester!
From the assembly area we were let out onto the track for 20mins of qualifying. Hitting a very wet first corner was mildly terrifying with a narrow wet racing line to following round the track surrounded by standing water. Going slightly off-line in the corners meant having to back off the power as you understeered towards the grass. The rear of the car was twitching out of the corners fighting for grip as you bled the power on as gently as possible. I did improve lap by lap as my confidence grew. I set the 19th fastest time out of 24 and was very happy to have made it round my first competitive track action.
After qualifying our car was weighed for the first time ever at 1373KG. The minimum weight for the class is 1300KG for our 1st Gen 986 Boxster with 250BHP.
Race #1
The grid is adjusted in class order so I started from pos 12A (aka 13th). I got away from the line well with no wheel spin but wasn't prepared for the lack of visibility in the spray and the close proximity of the other cars around me. I got overtaken by both production spec Boxsters and 4 or 5 of the 924's at the first two hairpin corners. It took the remainder of the race (8 laps) to get back past each of the 924's as I was sandwiched in the middle of great battle for their class lead.I finished 15th of 24 starters.
Race #2
On
Sunday morning we returned to a still wet Snetterton and softened the
dampers significantly to cure the excessive understeer in the corners.
It worked - giving me confidence to stay ahead of the 924's from the
start and set out catching the Boxsters in front of me. I managed to
pass one into a hair-pin but missed a gear change at crucial points when
lining up the next car for a pass. I finished 14th of 25 starters.
Race #3
During the lunch break it rained even heavier so we softened the front and rear dampers further. I again got off the line well, loosing places only to the two production spec Boxsters and kept all of Porsche 924's behind me. Taking the confidence from the end of the previous race into the first lap I realised I could keep pace with the Boxsters in front of me and set out catching and overtaking 3 cars. I was briefly up to 10th but a couple of mistakes let two cars plus a front-runner recovering from a 1st lap spin past. I finished 13th.
Labels:
race report
Final Preparations
The weekend before the Snetterton race we still had a number of jobs to complete.
Adjusting the rear tow straighter as I didn't like the feel of the car at the last track day and the race would all be about confidence to push the car.
The aluminium bottle fire extinguisher kit which is from a UK company called FEV was mounted in the car in place of the passenger seat we had during track days. The supplied tubing was cut and run to four spray nozzles (2 in the driver compartment and 2 in the engine bay) and connected up with t-pieces.
It is fired by externally and internally mounted self powered buttons with a control box to test and arm the system. The E Is for Extinguisher not Electrics!
The final job was to re-fit the standard air box with a performance filter to ensure we were compliant with the series regulations, removing the induction system previously fitted.
Labels:
fire extinguisher,
modifications
Sunday, 1 April 2012
Snetterton Shakedown 2
On 30th March we were at Snetterton in Norfolk again. After passing my ARDS test in the morning (see previous post) we had more running on track. Mechanically the car ran well and reliably.
The day was an open pit lane event and there were really too many cars at the event. Track time was disrupted continuously by red flag incidents and lots of traffic. Later in the afternoon we ran our race wheels and Toyo 888 tyres - however suffered some rubbing on the rear arches in hard cornering which will need more rolling and trimming of the inner wheel arches to fix.
The day was an open pit lane event and there were really too many cars at the event. Track time was disrupted continuously by red flag incidents and lots of traffic. Later in the afternoon we ran our race wheels and Toyo 888 tyres - however suffered some rubbing on the rear arches in hard cornering which will need more rolling and trimming of the inner wheel arches to fix.
Subscribe to:
Posts (Atom)








